Designer Asphalt Shingles (Shake Look) in Conifer
Premium look, asphalt value.
This page covers what designer asphalt shingles (shake look) actually is, how it performs in Colorado mountain conditions, regional pricing for Conifer, and how it compares to standard asphalt and other premium materials.
What This Material Is
Designer Asphalt Shingles (Shake Look) in Plain Terms
Designer asphalt shingles (shake look) are thicker, more dimensional versions of standard asphalt. They feature architectural depth, multi-tone color blends, and profiles that look closer to wood shake or slate. In Conifer, designer asphalt performs well through freeze-thaw cycles and handles extreme weather and elevation changes better than standard Class 3 or Class 4 shingles.
Performance
How It Performs in Colorado mountain Conditions
Durability
Thicker profiles and denser construction resist impact and weather degradation better than standard asphalt.
Color Retention
Premium granule coatings resist UV fading and weathering, holding appearance longer in Colorado sun.
Wind Resistance
Architectural designs and improved seal strips provide better wind holddown during storm events.
Aesthetics
Varied color blends and dimensional profiles create real visual depth — the most cost-effective way to make a roof look more upscale.
Regional Pricing
Pricing for Conifer
Pricing assumes a 3,000 sq ft (30 square) roof at standard complexity, with two-layer maximum overlay and current code requirements for Conifer.
Estimated Range
$12.11 – $18.45 per sq ft
$36,328 – $55,341
for a 3,000 sq ft roof at standard complexity
Factors that affect final cost:
- • Roof pitch and complexity
- • Penetrations and flashing detail
- • Existing deck condition
- • Local labor and material availability
How It Compares
Stacking Up Against Other Options
vs.
Class 3 Asphalt
- •Thicker shingles with more granule coverage
- •Better impact and UV resistance
- •Better color retention
- •~15–20% higher material cost
vs.
Class 4 Asphalt
- •Better aesthetics at comparable impact resistance
- •Slight difference in granule density and wind ratings
- •Similar durability expectations
- •Often preferred for appearance
vs.
Premium Materials
- •More affordable than stone-coated steel or standing seam
- •Easier installation than tile or metal
- •Proven longevity without specialty crews
- •Good value for better looks without a major price jump
Why Pak Exteriors
Local Experience in Colorado mountain
We've been installing designer asphalt shingles (shake look) across Colorado mountain for years. We hold certifications from multiple manufacturers, which means the product recommendation on your project is based on what works best for your roof and Conifer's climate, not on any single manufacturer relationship.
What our certifications and experience mean:
- Material recommendations based on your roof, exposure, budget, and goals
- Not steered by a single manufacturer relationship or volume target
- Proper installation techniques specific to this material type
- Ventilation and flashing details that actually work
Code Requirements
Designer Asphalt Shingles (Shake Look) Code in Conifer
Jefferson County Building Safety Division handles all permits, inspections, and code enforcement for Conifer as an unincorporated area. The 2018 Jefferson County Residential Code Supplement applies, including Appendix Z for Wildfire Zone 1. Conifer sits well above the 6,400-foot elevation threshold that triggers Class A fire rating requirements. Engineered design is required for homes in areas with ground snow loads exceeding 70 psf.
Minimum Code vs. Best Practice
Wildfire is the lead conversation in Conifer given dense forest exposure, with snow load a close second. Engineered design is required above 70 psf ground snow load. Stone-coated steel, synthetic composite, and standing seam metal are the strongest material recommendations. Ventilation design requires special attention given heavy snow loads and the wildfire-driven case for sealed assemblies.
Disclaimer
This information reflects typical residential reroof requirements for Conifer as an unincorporated area of Jefferson County. Wildfire Zone 1 designation, elevation, and site-specific snow load conditions can affect enforcement. Contractors must verify current requirements with the Jefferson County Building Safety Division prior to permitting.
Last Verified: May 27, 2026
Permit Required
Yes.
Drip Edge
Yes. Eaves and rakes.
Ice & Water Shield
Required at eaves, extending at least 24 inches inside the exterior wall line.
Attic Ventilation
Yes.
Mid-Roof Inspection
No for asphalt shingles. Yes for low-slope roofing. Yes for specialty roofing.
Roof Overlay
Yes. Two layers permitted.
Class A Fire Rating
Yes. Required by elevation.
Final Inspection
Yes.
Designer Asphalt Shingles (Shake Look) FAQs — Conifer
Common questions from Conifer homeowners.
For a 3,000 sq ft (30 square) roof, pricing typically ranges from $36,328 to $55,341. Final cost depends on roof pitch, complexity, penetrations, deck condition, and current code requirements in Conifer.
Designer Asphalt Shingles (Shake Look) costs more upfront than Class 3 or Class 4 asphalt but typically delivers significantly longer life expectancy, better impact resistance, and stronger long-term value. The right choice depends on how long you plan to stay in your home and your overall goals.
Yes. Premium materials require crews trained on the specific product, manufacturer requirements, and proper underlayment, flashing, and fastening methods. Pak holds certifications across multiple manufacturers and installs each material the way the manufacturer requires.
That depends on your roof structure, exposure, aesthetic goals, and budget. We walk you through the trade-offs honestly during a consultation — sometimes Designer Asphalt Shingles (Shake Look) is the right fit, sometimes a different material makes more sense.
You receive a 10-year workmanship guarantee plus a manufacturer-backed material warranty (limited lifetime on most products). Coverage details vary by manufacturer and certification level — we walk through specifics during your consultation.
Yes. We pull permits, coordinate inspections, and handle closeout documentation as part of every roof replacement in Conifer.
Have a specific question about your home?
Schedule an Inspection
Find Out What Your Project Will Cost
Real answers, transparent pricing, and a clear plan tailored to Conifer.