Project background
The home’s low-slope ModBit roof had active leaks and the decking under the ModBit was showing moisture damage. Pak Exteriors replaced the full low-slope ModBit portion, replaced the compromised OSB decking under it, re-flashed all existing pipe jacks, installed new drip edge and eave metals around the low-slope portion, and tied in one square of new GAF asphalt shingle at the transition where the low-slope meets the adjacent shingle roof.
Skylight replacement was not included in Pak’s scope. The skylights on this roof were replaced separately by a third party.
Low-slope ModBit replacement
Low-slope quantity: 6 squares, approximately 600 sq ft
ModBit replacement total: $5,392.16
Cost per ModBit square: approximately $899
Cost per square foot: approximately $8.99
Material installed (bottom up):
• Mule-Hide nail base, installed on top of the new OSB decking and under the ModBit system
• Mule-Hide SA (self-adhered) Base Sheet
• Mule-Hide SA-SBS Cap Sheet, color Heather Blend
• Mule-Hide 121 asphalt primer at the substrate
Flashing: All new drip edge and eave metals installed around the low-slope portion
Pipe jacks: All existing pipe jacks re-flashed for watertight penetrations
Manufacturer warranty: 10-year Mule-Hide manufacturer material warranty on the ModBit system
OSB decking replacement
Scope: Compromised OSB decking under the existing ModBit was replaced to provide a clean, structurally sound substrate for the new modified bitumen system.
Decking replaced: 20 sheets of 4′ x 8′ OSB total
• 2 sheets included in the base ModBit scope
• 18 additional sheets per the signed add-on
Additional OSB cost: $769.32
Shingle tie-in
Shingle quantity: 1 square
Material installed: GAF Timberline HDZ asphalt shingle, Barkwood
Underlayment at the tie-in: RhinoRoof U20 synthetic underlayment and RhinoRoof Granulated Self-Adhered ice and water shield installed in the tie-in area only, where the new shingle meets the new ModBit (RhinoRoof products are not used elsewhere on this project)
Scope: One square of adjacent shingle removed and replaced to properly tie the new ModBit system into the existing shingle roof at the transition
Warranty
Manufacturer warranty: 10-year Mule-Hide manufacturer material warranty on the ModBit
Workmanship warranty: 5-year Pak Exteriors partial roof replacement workmanship warranty on the labor
Installation, permits, and inspections
Installation duration:
• ModBit replacement, decking, and shingle tie-in: 1 day
Permits: City of Arvada
Inspections completed:
• Roof final inspection
Permit status: Permit passed and finaled





