Designer Asphalt Shingles (Shake Look) in Steamboat Springs
Premium look, asphalt value.
This page covers what designer asphalt shingles (shake look) actually is, how it performs in Colorado mountain conditions, regional pricing for Steamboat Springs, and how it compares to standard asphalt and other premium materials.
What This Material Is
Designer Asphalt Shingles (Shake Look) in Plain Terms
Designer asphalt shingles (shake look) are thicker, more dimensional versions of standard asphalt. They feature architectural depth, multi-tone color blends, and profiles that look closer to wood shake or slate. In Steamboat Springs, designer asphalt performs well through freeze-thaw cycles and handles extreme weather and elevation changes better than standard Class 3 or Class 4 shingles.
Performance
How It Performs in Colorado mountain Conditions
Durability
Thicker profiles and denser construction resist impact and weather degradation better than standard asphalt.
Color Retention
Premium granule coatings resist UV fading and weathering, holding appearance longer in Colorado sun.
Wind Resistance
Architectural designs and improved seal strips provide better wind holddown during storm events.
Aesthetics
Varied color blends and dimensional profiles create real visual depth — the most cost-effective way to make a roof look more upscale.
Regional Pricing
Pricing for Steamboat Springs
Pricing assumes a 3,000 sq ft (30 square) roof at standard complexity, with two-layer maximum overlay and current code requirements for Steamboat Springs.
Estimated Range
$36,328 – $55,341
For 30 squares at standard complexity
Factors that affect final cost:
- • Roof pitch and complexity
- • Penetrations and flashing detail
- • Existing deck condition
- • Local labor and material availability
How It Compares
Stacking Up Against Other Options
vs.
Class 3 Asphalt
- •Thicker shingles with more granule coverage
- •Better impact and UV resistance
- •Better color retention
- •~15–20% higher material cost
vs.
Class 4 Asphalt
- •Better aesthetics at comparable impact resistance
- •Slight difference in granule density and wind ratings
- •Similar durability expectations
- •Often preferred for appearance
vs.
Premium Materials
- •More affordable than stone-coated steel or standing seam
- •Easier installation than tile or metal
- •Proven longevity without specialty crews
- •Good value for better looks without a major price jump
Why Pak Exteriors
Local Experience in Colorado mountain
We've been installing designer asphalt shingles (shake look) across Colorado mountain for years. We hold certifications from multiple manufacturers, which means the product recommendation on your project is based on what works best for your roof and Steamboat Springs's climate, not on any single manufacturer relationship.
What our certifications and experience mean:
- Material recommendations based on your roof, exposure, budget, and goals
- Not steered by a single manufacturer relationship or volume target
- Proper installation techniques specific to this material type
- Ventilation and flashing details that actually work
Code Requirements
Designer Asphalt Shingles (Shake Look) Code in Steamboat Springs
Routt County Regional Building Department handles all building, electrical, mechanical, gas, plumbing, deconstruction, solar, sign, and grading permits for the City of Steamboat Springs and the surrounding Routt County. The City of Steamboat Springs ordinance adopts the ICC 2021 editions. Routt County is a Case Study Zone for ground snow load, meaning each project's design load comes from the Routt County Ground Snow Load Map. Loads commonly exceed 70 psf and vary significantly by site. The 2025 Colorado Wildfire Resiliency Code applies in designated areas.
Minimum Code vs. Best Practice
Steamboat's snow loads are among the highest in Pak's service area. Standing seam metal and synthetic composite are the dominant premium recommendations. Snow retention systems and extended ice and water coverage well past the wall line are essential credibility builders. Heat cable systems are particularly important given long winters and freeze-thaw exposure. 115 mph three-second gust design speed applies.
Disclaimer
This information reflects typical residential reroof requirements for the City of Steamboat Springs, with permits administered by the Routt County Regional Building Department. Routt County's Case Study Zone designation means snow load design loads vary by site. Contractors must verify current requirements with Routt County Regional Building Department prior to permitting.
Last Verified: May 27, 2026
Permit Required
Yes.
Drip Edge
Yes. Eaves and rakes.
Ice & Water Shield
Required, polymer-modified bitumen at eaves. Extended coverage required for snow loads above 65 psf.
Attic Ventilation
Yes.
Mid-Roof Inspection
Yes for all roof types.
Roof Overlay
No. Full tear-off standard.
Class A Fire Rating
Yes.
Final Inspection
Yes.
Designer Asphalt Shingles (Shake Look) FAQs — Steamboat Springs
Common questions from Steamboat Springs homeowners.
Have a specific question about your home?
Schedule an Inspection
Find Out What Your Project Will Cost
Real answers, transparent pricing, and a clear plan tailored to Steamboat Springs.