Stone-Coated Steel in Frisco
Metal performance with traditional aesthetics.
This page covers what stone-coated steel actually is, how it performs in Colorado mountain conditions, regional pricing for Frisco, and how it compares to standard asphalt and other premium materials.
What This Material Is
Stone-Coated Steel in Plain Terms
Stone-coated steel combines the durability of a metal roof with the look of stone or shake. Heavy-gauge steel panels are coated with stone granules bonded to the surface, giving you exceptional impact resistance, fire performance, and a 50+ year service life. In Frisco, it's a particularly strong choice for homes at elevation with severe weather exposure.
Performance
How It Performs in Colorado mountain Conditions
Hail and Impact Resistance
Stone-coated steel is one of the most impact-resistant roofing materials available — Class 4 rated, with strong long-term performance under hail exposure.
Class A Fire Rating
Non-combustible steel core with stone granule surface — well-suited for wildfire-conscious designs.
Wind Resistance
Interlocking panels rated for wind loads of 120+ mph when properly installed.
Service Life
50+ year expected service life with minimal maintenance — outlasts most asphalt by 2–3 cycles.
Regional Pricing
Pricing for Frisco
Pricing assumes a 3,000 sq ft (30 square) roof at standard complexity, with two-layer maximum overlay and current code requirements for Frisco.
Estimated Range
$52,650 – $64,350
For 30 squares at standard complexity
Factors that affect final cost:
- • Roof pitch and complexity
- • Penetrations and flashing detail
- • Existing deck condition
- • Local labor and material availability
How It Compares
Stacking Up Against Other Options
vs.
Class 4 Asphalt
- •Significantly longer service life (50+ vs 25–30 years)
- •Better hail resistance even than Class 4
- •Higher upfront cost, lower long-term cost
- •Heavier — structural assessment recommended
vs.
Standing Seam Metal
- •Traditional shake or tile aesthetic vs. modern look
- •Lower cost than standing seam
- •Different installation methodology
- •Similar service life and durability
vs.
Tile Roofing
- •Lighter weight, easier on framing
- •Lower installation cost
- •Similar visual depth and texture
- •Better impact resistance than concrete tile
Why Pak Exteriors
Local Experience in Colorado mountain
Stone-coated steel requires manufacturer-specific installation techniques, particularly around penetrations, valleys, and roof transitions. We hold certifications from leading stone-coated steel manufacturers and have installed these systems on Colorado mountain homes for years. We understand which profiles, gauges, and granule colors hold up best in Frisco.
What our certifications and experience mean:
- Material recommendations based on your roof, exposure, budget, and goals
- Not steered by a single manufacturer relationship or volume target
- Proper installation techniques specific to this material type
- Ventilation and flashing details that actually work
Code Requirements
Stone-Coated Steel Code in Frisco
Town of Frisco building department handles permits. Snow load and ice barrier requirements enforced. Standing seam metal and Class 4 impact-resistant shingles are commonly specified at this elevation.
Minimum Code vs. Best Practice
Ventilation design is critical when full ice and water coverage is installed to prevent condensation and ice dam formation.
Disclaimer
Confirm requirements with the Town of Frisco Building Department prior to permitting.
Last Verified: February 3, 2026
Permit Required
Yes.
Drip Edge
Required.
Ice & Water Shield
Yes. Entire roof surface. Full ice and water shield coverage required.
Attic Ventilation
Yes.
Mid-Roof Inspection
Yes, all roof types.
Roof Overlay
No.
Class A Fire Rating
Yes.
Final Inspection
Yes.
Stone-Coated Steel FAQs — Frisco
Common questions from Frisco homeowners.
Have a specific question about your home?
Schedule an Inspection
Find Out What Your Project Will Cost
Real answers, transparent pricing, and a clear plan tailored to Frisco.